Part No 1167584
5
Invacare® Matrx® Flovair™
3.2
Removing/Installing the Cushion Covers
Removing the Covers
1.
Remove the cushion from the seating surface. Refer to Attaching/Removing the Cushion To/From
the Seating Surface on page 4.
2.
Unzip the outer cover.
3.
Remove cushion, still inside the inner cover, from the outer cover.
4.
If desired, unzip the inner cover and remove the cushion from the inner cover.
Installing the Covers
1.
If the inner cover has been removed, position the cushion with the pelvic support layer in place
toward the rear of the inner cover.
2.
Slide the cushion into the inner cover.
3.
Zip the inner cover closed.
4.
Position the cushion with inner cover and the pelvic support layer in place toward the rear of the
outer cover.
5.
Slide the cushion into the outer cover.
6.
Zip the outer cover closed.
7.
Reattach cushion onto seating surface. Refer to Attaching/Removing the Cushion To/From the
Seating Surface on page 4.
WARNING
The covers are designed to protect the foam from moisture and to provide fire retardency. DO
NOT use the cushion without either the inner or outer cover. If the covers are torn, they MUST
be replaced IMMEDIATELY.
CAUTION
DO NOT remove both the outer cover and inner cover at the same time, otherwise damage to
the inner cover material may occur.
The pelvic support layer is at the top of the inner cover.
The zipper is at the rear and the stretch fabric is at the top of the outer cover.
The back surface of the cushion is marked “REAR”.
CAUTION
Use care not to snag the inner cover in the outer cover zipper, or damage to the inner cover will
occur.
Cushion
Cover
Zipper
