Invacare Lightweight Aluminum Wheelchai Owners Operating & Maintenance Manual Download

Page: 14 / 24

CALL TOLL FREE, 1-888-6AURORA

(628-7672)

QUESTIONS ABOUT THIS PRODUCT?

2. Pull the front of swing-back arm straight up/out of the

arm socket and towards the rear of the wheelchair.

3. To lock the swing-back arm, push the swing-back

arm towards the front of the wheelchair and then down-
ward into the unlocked socket.

NOTE: Armrest release lever MUST be in the unlocked
position when placing armrest into the arm sockets.

SWING-BACK ARMS (FIGURE 2)

WARNING

Make sure the locking mechanism is se-
cured before using the wheelchair.

1. Unlock the swing-back arms by rotating the front arm-

rest release lever towards the outside of the wheel-
chair.

Armrest Pad

Armrest

Assembly

Phillips

Screws

Clothing

Guard

FIGURE 3 - REPLACING ARMREST PAD/

CLOTHING GUARDS

REPLACING ARMREST PAD/
CLOTHING GUARDS (FIGURE 3)

Armrest Pad

1. Remove the phillips screws that secure the arm-

rest pad to the armrest assembly.

2. Replace armrest pad and securely tighten with

the existing phillips screws.

Clothing Guards

1. Remove the four (4) screws that secure the ex-

isting clothing guard to the armrest assembly.

2. Replace the existing clothing guard with the new

clothing guard and securely tighten with the ex-
isting hardware.

3. Repeat STEPS 1-2 for the opposite side if nec-

essary.

ARMS

PROCEDURE 2

A
R

This Procedure Includes the Following:

Removing or Replacing Armrests

Swing-Back Arms

Replacing Armrest Pad/ Clothing Guards

WA R N I N G

After making adjustments, always
make sure that parts are properly tight-
ened BEFORE using the wheelchair.

REMOVING OR REPLACING ARMRESTS
(FIGURE 1)

Removing Armrests

1. Unlock the arm assembly by rotating the armrest re-

lease levers located on the armrest to the unlocked
position.

2. Remove armrest from the wheelchair.

Replacing Armrests

NOTE: Armrest release levers MUST be in the unlocked
position when placing armrests into the arm sockets.

1. Install the armrest into the arm sockets on the wheel-

chair frame.

2. Lock the armrest by rotating the armrest release le-

vers into locked position.

FIGURE 1 - REMOVING OR REPLACING

ARMRESTS

Armrest

Release

Lever

Armrest

Wheelchair

Frame

Armrest

Release

Lever

Arm

Socket

Arm Socket

Armrest Release

Lever

FIGURE 2 - SWING-BACK ARMS

Swing Back

Arm

Summary of Contents for Lightweight Aluminum Wheelchai

























Search results

Summary of Contents for Lightweight Aluminum Wheelchai

Reviews:

Related manuals for Lightweight Aluminum Wheelchai

Brands by name

Popular brands

Invacare Lightweight Aluminum Wheelchai, Owners Operating & Maintenance Manual

Search results

Summary of Contents for Lightweight Aluminum Wheelchai

Reviews:

Related manuals for Lightweight Aluminum Wheelchai

Brands by name

Popular brands