background image

8

OPERATING

OPERATING BED

WARNING

DO NOT lay, sit or lean in such a way that
entire body weight is placed on the head
or foot end of the bed while raising or low-
ering - otherwise injury or damage may
occur.

CAUTION

Make sure the movement of the bed is free
from obstruction.

DO not pull the bed by the power cord.

ALWAYS unplug the bed BEFORE moving.

Economy Leisure Bed Pendant (FIGURE 1)

FIGURE 1 - OPERATING BED - ECONOMY

LEISURE BED PENDANT

Press and

Hold to:

 Raise Head

Lower Head

Press and

Hold to:

 Raise Foot

Lower Foot

LOCKING/UNLOCKING CASTERS
(FIGURE 3)

1. Perform one (1) of the following:

LOCKING - Toggle the locking lever on the four (4)
locking casters to the LOCKED position.

UNLOCKING - Toggle the locking lever on the four
(4) locking casters to the UNLOCKED position.

OPERATING

O

P
E
R
A

T

I

N

G

FIGURE 2 - OPERATING BED - DELUXE

LEISURE BED  PENDANT

Press to 

Return

to Flat Position

Press to

Program

Desired
Position

Press to

Recall Position

Set by Program

Button

Press to

Stop All

Programs

Press to

Start Neurosage

Wave Action

Press and Hold to

 Raise Head

Lower Head

Press and Hold to

 Raise Foot

Lower Foot

Press and Hold to

Increase Head

Massage Intensity.

When using

Neurosage Wave

Action, press to

Increase Massage

Intensity

Lower Head

Massage Intensity.

When using

Neurosage Wave

Action, press to

Decrease Massage

Intensity

Press and Hold to

Increase Foot

Massage Intensity.

When using

Neurosage Wave

Action, press to

Increase Wave

Action Speed

Lower Foot

Massage Intensity.

When using

Neurosage  Wave

Action, press to

Decrease Wave

Action Speed

Deluxe Leisure Bed Pendant (FIGURE 2)

CAUTION

Two (2) deluxe  beds in the same room can-
not be operated at the same time. If the
pendants of both beds are sending com-
mand signals at the same time, they will in-
terfere with each other.

NOTE: The head and foot ends of the bed cannot be oper-
ated at the exact same time (unless using the level button ).

NOTE: Before using the massage, raise the head and
foot ends approximately 1/2-inch off of the bed frame.
Otherwise the bed may make excessive noise.

NOTE: Once the Massage system is activated, it will au-
tomatically change to the last massage setting used and
will shut off in thirty (30) minutes. To restart the massage
action, press the neurosage button.

Summary of Contents for LBDF













Reviews: