background image

2

SPECIAL NOTES

SPECIAL NOTES

S
P
E

C

I

A

L

N

O

T

E
S

WARNING

DO NOT OPERATE THIS EQUIPMENT WITHOUT FIRST READING AND

UNDERSTANDING THIS MANUAL. IF YOU ARE UNABLE TO

UNDERSTAND THE WARNINGS, CAUTIONS, AND INSTRUCTIONS,

CONTACT A HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL

PERSONNEL IF APPLICABLE BEFORE ATTEMPTING TO USE THIS

EQUIPMENT - OTHERWISE INJURY OR DAMAGE MAY RESULT.

DANGER/WARNING/CAUTION notices used in this manual apply to hazards or unsafe prac-
tices which could result in personal injury and/or property damage.

NOTICE

The information contained in this document is subject to change without notice.

Check all parts for shipping damage and test before using. In case of damage, do NOT
use. Contact the Dealer for further instruction.

WARNING

This bed is for residential use only. This bed is NOT for hospital use and was not designed to
meet hospital standards.

DO NOT use this bed outdoors.

DO NOT use near explosive gases.

Possible fire hazard when used with oxygen administering equipment other than nasal or
masked type.

DO NOT use this bed with an oxygen tent.

When using nasal or masked type administering equipment, oxygen or air tubing MUST be
routed and secured properly to ensure that tubing does NOT become entangled and
damaged during normal operation of the bed.

When using liquids in or around the bed, caution should be taken to ensure that liquids of
any kind are not spilled. If a liquid is spilled in or around the bed, stand in a dry area and
UNPLUG the bed immediately. Clean up spill and allow bed or area around bed to dry
thoroughly before using the electric controls again.

DO NOT use bed rails with this bed.

Close supervision is necessary when this product is used by or near CHILDREN OR INDI-
VIDUALS WITH DISABILITIES.

NEVER PERMIT ANYONE UNDER THE BED AT ANY TIME.

When operating/moving beds, ALWAYS ensure that the individual utilizing the bed is posi-
tioned properly within the confines of the bed. DO NOT let any extremities protrude over
the side of the bed when performing these functions.

Summary of Contents for LBDF













Reviews: