Invacare Fox, User Manual

Page: 73 / 92

Transport
restrict or forbid certain transport procedures. Please ask
the transport company regarding each individual case.
• Before transporting your mobility device, make sure the
motors are engaged and that the remote is switched off.
Invacare strongly recommends that you additionally
disconnect or remove the batteries. Refer to
8.4.4
Removing/Installing the battery boxes, page 75 .
• Invacare strongly recommends securing the mobility
device to the floor of the transporting vehicle.
Proceed as follows to disassemble the mobility device for
transport:
1. Remove the legrests. Refer to legrest chapters under 5
Setup, page 27 .
2. Fold the backrest forwards. Refer to 8.4.1 Folding the
backrest forwards, page 73 .
3. Disconnect the remote. Refer to 8.4.2 Disconnecting
the remote, page 74 .
4. Remove the seat if necessary. Refer to 8.4.3
Removing/Installing the seat, page 74 .
You can leave the seat on the mobility device
and move the mobility device like a trolley by
tipping it on the antitippers.
5. Remove the battery boxes. Refer to 8.4.4
Removing/Installing the battery boxes, page 75 .
6. Fold up the chassis. Refer to 8.4.5 Folding/Unfolding
the chassis, page 76 .
8.4.1 Folding the backrest forwards
1.
Pull the belt A to the rear. The locking pins B are
pulled out of the locking plates. The backrest can now
be moved.
2.
Push the backrest completely to the front.
3. The locking pins engage automatically.
1577074-F 73