Invacare® Fox™
1.
On both sides, loosen the bottom backrest screw
A
.
Do not remove the screws!
2.
Move the backrest to the required seat depth.
You can adjust the seat depth steplessly. Use scale
B
on the seat as a guide for this purpose.
Ensure that the same seat depth is set on both sides.
3.
Re-tighten the screws.
5.7 Adjusting the seat angle
CAUTION!
Adjusting the seat tilt or the backrest angle
changes the geometry of the mobility device
and directly influences its dynamic stability!
– For details regarding dynamic stability,
negotiating gradients and obstacles and the
correct adjustment of seat tilt or backrest angle,
refer to
and
Driving up and down gradients, page 60
•
10 mm open-ended spanner
•
5 mm Allen key
The possible seat angles are marked on a scale on the
center post. Depending on the rear seat height, you need to
use the bottom or top scale respectively:
•
Upper seat height: use the bottom scale
•
Lower seat height: use the top scale
1.
Remove the screw and nut
A
.
2.
Adjust the center post to the desired seat angle.
3.
Refit the screw and nut.
40
1577074-F
Summary of Contents for Fox
Page 91: ...Notes ...
