Invacare Etude Classic User Manual Download Page 8

Page: 8 / 27

Table of Contents

1. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2. Unpacking your product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3. Assembly of Etude

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4. Fitting the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5. Rebuilding from 3-section to 4-section . . . . . . . . . . . . . . . . . . . . . 13

6. Operating the Etude

with 4-section mattress support . . . . . . 14

7. Operating the Etude

with 3-section mattress support . . . . . . 15

8. Adjustment of leg section (only on 3-sectioned beds) . . . . . . . . . 16

9. Emergency lowering of the backrest and/or thigh section . . . . . . 17

10. Operating the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

11. Dismantling the Etude

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

12. Using the transport brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

13. Order numbers for accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

14. Cleaning and disinfection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

15. Maintenance and servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

16. Maintenance chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

17. Waste disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

18. Trouble-shooting the electrical system . . . . . . . . . . . . . . . . . . . . . 22

19. Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

20. Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

21. Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Summary of Contents for Etude Classic




























Search results

Summary of Contents for Etude Classic

Reviews:

Brands by name

Popular brands

Invacare Etude Classic, User Manual

Search results

Summary of Contents for Etude Classic

Reviews:

Brands by name

Popular brands