background image

11

PROCEDURE 3

UPHOLSTERY/FOOTREST

U
P
H

O

L

S
T
E
R
Y

This Procedure includes the following:

Adjusting/Replacing Back Upholstery

Adjusting/Replacing Leg Cushion with Foot Pouch

Replacing Seat Sling Upholstery

Installing the Plastic Footplate

Installing/Using/Adjusting the Fixed Footrest

Fastening

Flaps

Slots

Foot Pouch

Attaches

Here

Back Upholstery

FIGURE 1 - ADJUSTING/REPLACING BACK

UPHOLSTERY

Foot Pouch

Bottom of

Back

Upholstery

WARNING

After ANY adjustments, repair or service
and BEFORE use, make sure all attachment
hardware is tightened securely - other-
wise, injury or damage may result.

The tautness of the back upholstery, knee
and/or foot position, as well as the user con-
dition directly relate to the stability of the
racing chair. Any change to one (1) or any
combination of the three (3) may cause
the racing chair to decrease in stability.
Refer to STABILITY in PROCEDURE 1 of this
manual.

ADJUSTING/REPLACING BACK
UPHOLSTERY (FIGURE 1)

1. Unlatch the three (3) fastening flaps that secure the

back upholstery to the racing chair frame.

Adjusting

1. Adjust back upholstery to the desired tautness.

TIGHTER upholstery will increase the stability and main-
tain normal maneuverability of the racing chair because
the user is pushed forward in the racing chair slightly.

LOOSER upholstery will increase the maneuverability
and make the racing chair less stable because addi-
tional weight is being distributed onto the rear wheels.

Replacing

1. Unlatch the foot pouch of the leg cushion from the

back upholstery (kneeling upholstery only).

2. Unlatch the bottom of the back upholstery from the

seat sling upholstery.

3. Remove the existing back upholstery from the racing

chair.

4. Feed the top two (2) fastening flaps of the new back

upholstery through the slots on the racing chair frame.

5. Feed the bottom fastening flap of the new back upholstery

between the racing chair frame and the clothing guards.

6. Adjust the new back upholstery for desired  tautness.

Refer to ADJUSTING BACK UPHOLSTERY in this
procedure of the manual.

Seat Sling

Upholstery

Seat Cushion

F

O
O

T
R
E
S
T

7. If the racing chair is equipped with kneeling upholstery,

attach the foot pouch to the back upholstery and adjust.
Refer to ADJUSTING/REPLACING LEG CUSHION
WITH FOOT POUCH in this procedure of the manual.

ADJUSTING/REPLACING LEG
CUSHION WITH FOOT POUCH
(FIGURE 2)

WARNING

If the racing chair is equipped with kneel-
ing upholstery, always ensure the foot
pouch is securely latched to the back up-
holstery. Otherwise, injury can occur.

Adjusting

1. Adjust leg cushion w/foot pouch to the desired taut-

ness.

Summary of Contents for Eliminator?





















Reviews: