36
7.5
Using the remote to control the wheelchair
•
Switch on the remote (ON/OFF button). The displays on the remote will illuminate. The
wheelchair is ready to start.
•
Set the travel speed (buttons for adjusting travel speed - see section on
"
Assembly of the
remote
"
on page
32
).
Can the electronic system programming be adapted?
The electronic controller is programmed with standard values during manufacture. Your
Invacare® dealer can carry out programming tailored to fit your requirements.
PLEASE NOTE: Every alteration to the drive programme can influence vehicle handling
and the tipping stability of the wheelchair!
•
Alterations to the drive programme must only be carried out by authorised Invacare®-dealers!
•
Invacare® supplies all wheelchairs from the factory with a standard drive programme.
Invacare® can only assume a warranty for the safe vehicle handling of the wheelchair – in
particular tipping stability - for this standard drive programme!
Will the wheelchair not drive after switching on?
Check the drive-away lock (see chapter
"Activate/de-activate the immobiliser "
on page
35
)
and the status bar indicator (see chapter
"Battery charging display"
on page
34
.).
