SECTION 3—ASSEMBLY
Invacare Mobile Recliners
12
Part No. 1141494
SECTION 3—ASSEMBLY
WARNING
After ANY adjustments, repair or service and before use, make sure that all attach-
ing hardware is tightened securely - otherwise injury or damage may result.
Assembling the Recliner
WARNING
Tighten mounting screws securely. Failure to do so may result in bodily injury or
damage to the recliner.
Assembling Models IH6074A and IH6065 series
NOTE:
For
this
procedure,
refer
to
FIGURE 3.1
on
page 13.
1. Remove
back
frame
with
back
cushion
from
its
carton.
2. Lock
the
rear
casters.
Work
from
the
rear
of
the
recliner
base.
NOTE:
Ensure
that
footrest
is
in
closed
position
before
installing
the
back
frame
with
cushion.
3. Lift
the
chair
back
in
an
upright
position
behind
the
rear
seat
cross
brace.
4. Slide
the
back
tubes
into
the
open
tube
ends
of
the
rear
seat
cross
brace.
5. Lift
the
plastic
skirt
mounted
on
the
bottom
of
the
seat
and
align
behind
the
rear
seat
frame
crossbrace
(Detail
“A”).
6. Align
the
holes
in
the
skirt
to
the
holes
in
the
chair
back
by
fastening
the
hardware.
7. Securely
tighten
the
two
hex
screws
to
secure
the
back
cushion
to
the
back
frame.
