5 FRONT RIGGINGS
Invacare
®
Concept 45 Wheelchair
34
Part No. 1088191
5 Front Riggings
5.1
Installing/Removing Front Riggings
Installing
1.
Turn the front rigging assembly to the side (open front rigging is perpendicular to wheelchair).
2.
Install the hinge plates of the front rigging assembly onto the hinge pins on the wheelchair frame.
3.
Push the front rigging assembly towards the inside of the wheelchair
until it locks into place.
4.
Repeat this procedure for the other front rigging assembly.
5.
To release the front rigging, push the front rigging release lever
inward, rotate front rigging outward.
Removing
1.
Push the front rigging release lever inward.
2.
Rotate swingaway front rigging assembly outward.
3.
Lift the swingaway front rigging assembly off the hinge pins.
FIGURE
1
Installing/Removing Front Riggings
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
When performing STEP 3, it may be necessary to pull release lever toward front of chair to assist the front rigging to lock
in place.
The footplate will be on the inside of the
wheelchair when locked in place.
Front Rigging
Release Lever
Front Rigging Assembly
Footplate
Hinge Plates
Hinge
Pins
Swingaway footrest
shown.
