Invacare Concept 45 User Manual Download

Page: 27 / 60

3 OVERVIEW

Part No. 1088191

Invacare

Concept 45 Wheelchair

3.3

Specifications

Concept 45

Overall Width:

23 1/4inches

Overall Length:

44 3/4 inches

Overall Height:

40 inches

Seat Width:

15 to 20 inches

Seat Depth:

15 to 19 inches

Seat-to-Floor:

14 1/4, 15 1/4, 16 1/5, 17 1/4, 17 1/2 and 18 1/4 inches

(

+/- ¼-inch due to tire wear and manufacturing tolerances.)

Back Height:

18 or 20 inches

Arm Styles:

Fixed Height, Desk or Full Length

Front riggings:

Swingaway Footrests and Elevating Legrests

Rear Axle:

Permanent and Quick Release (Optional)

Rear Wheels:

20, 22 or 24 inch Composite Urethane

Handrims:

Aluminum

Wheel Locks:

Push or Pull to Lock

Caster:

7 inch Composite Urethane

Upholstery:

Black Nylon (screw on)

Weight Limit:

250 lbs

Weight:

55 pounds (Aprox.)16 X 16 inch Seat, Without Front Riggings

Summary of Contents for Concept 45





























































Search results

Summary of Contents for Concept 45

Reviews:

Related manuals for Concept 45

Brands by name

Popular brands

Invacare Concept 45, User Manual

Search results

Summary of Contents for Concept 45

Reviews:

Related manuals for Concept 45

Brands by name

Popular brands