5.
Tighten the knob to secure the adjustable deck wing.
6.
Adjust the head board width. Refer to
the Head Board Width for CS9FX600, page 53
7.
Repeat steps 1 to 6 for each section until they are all
adjusted to the same width.
6.7.2 Adjusting the Head Board Width for CS9FX600
Bed end model IHBEADJ is intended for use on bed model
CS9FX600. The head board is adjustable and ships in the
position for a 36 in wide bed.
1.
Firmly grasp one of the board wings
A
.
2.
While holding the board wing, remove the knobs
B
securing that wings to the center section
C
.
3.
Move the board wing until the mounting holes line up
with the desired adjustment holes in the center section.
4.
Install the knobs to secure the board wing in the desired
position. Tighten securely
5.
Repeat steps 1-4 for the remaining board wing.
1153410-Q
53
