Invacare® Bora/Spectra XTR Series
Your mobility device can also be fitted with manual wheel
locks in addition to the motor brakes. These prevent the
mobility device from rocking during transport, for example
in the case of play in the transmission.
Engaging the manual wheel lock
1.
Press lever (1) forward.
Disengaging the manual wheel lock
1.
Pull lever (1) backwards.
6.4 Getting in and out of Mobility Device
– The armrest must be removed or swiveled
up in order to get into or out of the mobility
device from the side.
6.4.1 Removing the armrests in order to side transfer
(Standard seat / Modulite seat)
The armrest is either fixed with a locking pin or a locking
screw, depending on the version. If you intend to get into
the mobility device on the side that the remote is on, then
depending on the remote version you may be able to detach
the remote cable.
1.
Pull the plug
A
of the remote cable to disconnect the
remote.
2.
Loosen wing nut
B
.
3.
Remove the armrest from the holder.
6.4.2 Removing the armrests in order to side transfer
(Flex 2 seat)
The armrest is either fixed with a locking pin or a locking
screw, depending on the version. If you intend to get into
the mobility device on the side that the remote is on, then
depending on the remote version you may be able to detach
the remote cable.
84
1528224-Y
Summary of Contents for Bora Series
Page 126: ...Notes...
Page 127: ...Notes...
