A-4
62
Part No. 1110545
ADJUSTING THE T-ARMS
ADJUSTING T-ARM HEIGHT (FIGURE 3)
1. Unlock the T-arm by flipping the T-arm release lever towards the inside of the wheelchair.
NOTE: If necessary, pull out on the T-arm release lever and rotate 180° so it can be flipped
towards the outside of the wheelchair.
2. Slide the T-arm to one (1) of:
A.
Low Height T-Arms
- Nine (9) positions.
B.
High Height T-Arms
- Seven (7) positions.
NOTE: If the inside T-arm post does not slide up and down in the outside T-arm post as desired,
perform one (1) of the following:
A.
Tighten
- Tightening the set screws on the outside T-arm post
will make it more
difficult
to move the inside T-arm post up and down.
B.
Loosen
- Loosening the set screws on the outside T-arm post
will make it
easier
to move the inside T-arm post up and down.
3. Lock the T-arm by flipping the T-arm release lever towards the front of the
wheelchair.
FIGURE 3 - ADJUSTING T-ARM HEIGHT
Set
Screws
T-Arm Release Lever - Unlocked Position
Outside T- Arm Post
T-Arm Release Lever
- Locked Position
Inside T-Arm
Post
SECTION 8
ARMS
ARMS
