Invacare® Homecare Beds
4.8 Assembling the Universal Bed Ends
Invacare recommends that two people perform this
procedure.
Before assembling bed, ensure that the locking
casters are attached to the universal bed ends
diagonally across from each other.
1.
Stand one bed end
A
as close to the head spring
section
C
as possible.
2.
Grasp the head spring section by the side and raise
it until the rivets on the corner plates of the spring
section are high enough to place into the corner locks
D
on the bed end.
WARNING!
Risk of Injury or Damage
To avoid injury or damage from misuse:
– DO NOT place your hand between the
spring section and the bed end.
3.
Tilt the bed end toward the head spring section and
place the rivets
B
into the corner locks.
4.
Return the universal bed end to its full upright position.
The head spring rivets will lock into place.
5.
Repeat the same procedure for other universal bed end.
B
C
D
A
24
1114836-H-05
Summary of Contents for 5307IVC
Page 47: ...Notes...
