SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
39
❑
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑
Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑
Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (freewheeling).
❑
Inspect caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Ensure casters are free of debris.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Inspect tires for flat spots and wear.
❑
Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑
Ensure wheel mounting nuts are secure on drive wheels.
❑
Check pneumatic tires for proper inflation.
❑
Inspect motor brushes and gearbox coupling.
❑
Inspect for any loose hardware on the wheelchair.
❑
Inspect charger AC power cord for damage. Replace if necessary.
Inspect/Adjust Initially
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
❑
Make sure wheelchair rolls straight (no excessive drag or pull to one side).
❑
Inspect all fasteners.
❑
Make sure clothing guards are secure.
❑
Make sure arms are secure but easy to release and adjustment levers engage properly.
❑
Make sure adjustable height arms operate and lock securely.
❑
Make sure upholstery has no rips.
❑
Make sure armrest pad sits flush against arm tube.
❑
Make sure axle nut and wheel mounting nuts are secure on drive wheels.
❑
Make sure there is no excessive side movement or binding when drive wheels are
lifted and spun when disengaged (free-wheeling).
❑
Inspect wheel/fork assembly for proper tension by spinning caster; caster should come
to a gradual stop.
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Make sure all caster/wheel/fork/headtube fasteners are secure and not damaged/
missing.
