Keep fingers away
and do NOT over-stretch
Ensure
the tips
are secure
SURFACE TIPS
This quad cane is not suitable for use on sloping
or uneven surfaces.
Take particular care on these surfaces.
1. Unfold cane section (A), loosen the locking collar and insert the upper shaft into the handle,
until the snap button locates in the hole.
2. Tighten the locking collar by turning it clockwise.
3. Loosen the locking collar on the height-adjustable shaft (B). Press in the snap buttons and
insert the upper shaft until one of the snap buttons locates into the hole, at the required height.
4. Tighten the locking collar by turning it clockwise.
5. Unscrew the thumb screw (E) and washer (D) from the bottom of the shaft.
6. Insert the shaft (B) into the hole in the base (C), ensuring that the slot in the shaft locates
correctly.
7. Tighten the screw and then push down the lever firmly, ensuring that the assembly is tight and
secure.
8. Slide the black collar down the shaft, onto the base.
This quad cane
accommodates both right
and left handed users.
Ensure the orientation of the
handle and base are set up
correctly for the user. The
most splayed-out legs
should be furthest away
from the user’s feet while
walking.
E
D
A
B
C
A.
Upper Shaft
B. Height-Adjustable
Shaft
C. Base
D. Washer
E. Thumb Screw
!
WARNING:
To minimise the risk of injury from improper and unsafe use of this quad cane, read
these instructions and safety precautions before using.
INSTRUCTIONS FOR USE
ASSEMBLY INSTRUCTIONS
SAFETY PRECAUTIONS
Uneven ground
Very soft ground
Wet surfaces
Intended Purpose:
This quad cane is a walking aid to assist those who have reduced mobility.
Safety Precautions:
• Consult a healthcare professional before using any assisted mobility device.
• Not to be used by persons heavier than 136kg (21st)
• Not intended to support the full weight of the user.
• Not intended for use on ice or other slippery surfaces as it has the potential to slip.
• Do not use unless individual segments are joined together securely, and the push button is fully engaged.
• When assembling individual segments, keep fingers away to avoid being pinched.
• Do not stretch the internal elastic cord more than necessary to assemble or disassemble the segments. Do not
use the quad cane if the elastic cord is cut, frayed, or damaged.
• Do not use the quad cane on sloping or uneven surfaces, as the quad cane may fall sideways when
weight is applied to the handle.
• If the handle or tip becomes loose, or if the cane becomes damaged, stop using the cane immediately.
!
Maximum user
mass symbol
