Intrise AIR ZERO AZ, User Manual, Page: 18 / 44

18
12-2
If you want the nozzle not to move forward automatically, press STOP button and UP button at
the same time. If you want the nozzle to move forward automatically, press once more STOP
button and UP button at the same time.
12-3
To make counter value as 0 (zero), turn off and on the electricity power.
13. SETTING OF PROPER TIME/VACUUM DEGREE
* Time Unit : 1 = 0.1 Sec.
* Before mass operation, please find out proper sealing time and cooling time
through a full sealing test.
* A continuous use of the machine raises the temperature of sealing bar and can
change proper sealing condition. Please set sealing time more short and cooling
time more long.
MODE TIME / VACUUM DEGREE SETTING
VACUUM1
VACUUM2
Set the proper time or vacuum degree according to the size of vacuum bag,
the type of packed object, and packing purpose.
GAS1
GAS2
Set the proper time according to the size of vacuum bag, the type of packed
object, packing purpose and pressure degree of GAS.
SEALING
Set the proper time according to the type and thickness of vacuum bag
( Generally, set 6 ~ 11 (=0.6 ~ 1.1sec) ). Especially, in the case of dual heat
wire option or 5 mm heat wire option, sealing time should be set more
shortly.
* Warning : If the sealing time is set at 0, it means in effect infinite time so that
sealing continue infinitely. But, in program, if someone even just once set
sealing time at more than 0, it can ’ t be set at 0 since then. So, if the sealing
time is set at 0 when you first get the machine, you must change the value at
more than O. Of course, before delivery to buyer, my production line always
does two times of final inspection test. And, during that time, sealing time is set
at more than 0.
COOLING
Set 3.5~4.0 times as long as sealing time. The longer cooling time is, the
better the sealed surface is. ( There is a chance that a change is needed
according to the type of film )