Open-X™ 8M Development Kit based on the NXP i.MX8™ Processor User Guide Version 1.0
7
Copyright Intrinsyc Technologies Corporation
3.
OPEN-X 8M DEVELOPMENT KIT
3.1
Introduction
The Open-X 8M provides a quick reference or evaluation platform for NXP Semiconductors latest
processor series, the i.MX 8M. This kit is suited for Android or Linux application developers,
multimedia audio or video vendors, voice processing vendors, consumer product manufacturers,
OEMs, hardware component vendors, video surveillance, and camera vendors to evaluate, optimize,
test and deploy applications that can utilize the NXP Semiconductors i.MX8 series technology.
3.2
Development Platform Notice
This development platform contains RF, analog and digital hardware and software intended for
engineering development, engineering evaluation, or demonstration purposes only and is meant for
use in a controlled environment. This device is not being placed on the market, leased or sold for use
in a residential environment or for use by the general public as an end user device.
This development platform is not intended to meet the requirements of a commercially available
consumer device including those requirements specified in the European Union directives applicable
for radio devices being placed on the market, FCC equipment authorization rules or other regulations
pertaining to consumer devices being placed on the market for use by the general public.
This development platform may only be used in a controlled user environment where operators have
obtained the necessary regulatory approvals for experimentation using a radio device and have
appropriate technical training. The device may not be used by members of the general population or
other individuals that have not been instructed on methods for conducting controlled experiments and
taking necessary precautions for preventing harmful interference and minimizing RF exposure risks.
Additional RF exposure information can be found on the FCC website at
http://www.fcc.gov/oet/rfsafety/
3.3
Anti-Static Handling Procedures
The Open-X 8M Development Kit has exposed electronics and chipsets. Proper anti-static precautions
should be employed when handling the kit, including but not limited to:
•
Using a grounded anti-static mat
•
Using a grounded wrist or foot strap
