EN-V233 – 5009 – AB – 07-0106-EN (EEN-REC4)
Real Time Receiver and RW Installation and use Page 5 / 11
EQUIPMENT CONFIGURATION
A)
L
AUNCHING
R
EAL
T
IME MODE
To launch the 07-0106-EN (EEN-REC4) receiver in Real Time mode, you must program
the remote controls online and update the device.
B)
L
AUNCHING
RW
(R
EAD
/W
RITE
)
MODE
To launch the 07-0106-EN (EEN-REC4) receiver in RW (Read/Write) mode, you must
program the remote controls online:
Have the device’s serial number at hand.
Log on to the website with your username and password or create an account
(“create an account” button if logging on for the first time).
Create a residence and then a “07-0106-EN” (EEN-REC4) access by entering the
serial number for receiver 07-0106-EN (EEN-REC4).
You will then be able to program the remote controls that you will allocate to
residents.
The remote controls will automatically open the doors controlled by the receiver. The
first control will launch the receiver.
If you need to make “Key Pass” controls, then you must activate the pass option by
programming a special remote control on the website (“Activate Pass Option” button from
the “control unit” menu on the receiver’s screen).
Press a button on the “Pass Option” remote control in front of the receiver. The passes will
then open.
