Intraphex TD-BMW6PIN-v2, Install Manual

Page: 10 / 16

TOUCH LAYER INSTALLATION

AGAIN, SINCE THIS PRODUCT FITS MUTIPLE VEHICLES AND THE
DISASSEMBLY OF THE PLASTIC FRAME DIFFERS FROM CAR TO CAR, YOU
WILL NEED TO REMOVE THE PLASTIC FRAME FROM THE MONITOR.
TYPICALLY IT IS JUST A COUPLE OF SCREWS AND CLIPS.

ONCE SEPERATED YOU WILL NEED TO ALIGN THE TOUCH LAYER ON THE
MONITOR SO THAT IT IS CENTERED. USING A HIGH QUALITY CLOTH
TAPE, ATTACH THE LAYER TO THE MONITOR MAKING SURE THAT THE
CORRECT SIDE IS FACING OUT.

YOU WILL NOW USE THE PROVIDED RIBBON CABLE TO 4 PIN HARNESS
LOCATED IN THE KIT, TO CONNECT THE TOUCHLAYER’S RIBBON CABLE
TO THE NAVIBOX. THIS IS SHOWN IN THE LAYOUT DIAGRAM IN THE
FRONT OF THIS MANUAL.

SECURE THE RIBBON CABLE AND CONNECTION TO THE BACKSIDE OF THE
MONITOR WITH CLOTH TAPE.

REASSEMBLE PLASTIC FRAME AND MONITOR ASSEMBLY.