PAGE
22
Rollover Protection Structure
(ROPS)
The Rollover Protection Structure (ROPS) on this vehicle
meets American National Standard Institute (ANSI)
Standards and OSHA standards for rollover performance
requirements. Always have authorize Intimidator, Inc.,
dealer thoroughly inspect the ROPS if it ever becomes
damaged in any way.
No devise can assure occupant protection in the event of a
rollover. Always follow safe operating practices outlined in
this manual to avoid a vehicle rollover.
DANGER:
•
Vehicle rollover could cause
serious injury or death. Always
avoid operating in a manner that
could result in vehicle rollover.
•
Do not grab or hold ROPS while
vehicle is moving. If a rollover
occurs, holding to the roll cage
could crush your hand.
•
Modifying or cutting the ROPS
can cause serious injury or
death.
•
Do not add any unauthorized
accessory that bolts into the
ROPS mounting points.
Seat Removal
Pull up on the front of the seat and slide it towards the front
of the vehicle. To install the seat, slide the seat into the rear
of the seat base until the two metal stud attached to the
front of the seat is aligned with the two rubber grommets
attached to the front of the seat base. Push down firmly on
the front of the seat until the studs are fully seated into the
grommets.
