intexinternational.com
Copyright © 2020 Intex International.
Building Excellence
Site Equipment
1
2
3
2
4
ASSEMBLY INSTRUCTIONS
Do not assemble while plugged into power.
1. Insert stand base (1) into other end of tube. Use the stand handle (2) to position the
lamp to the desired angle. Insert and tighten angle adjustment knob (3).
2. Lamp angle may be altered simply by loosening the angle adjustment knob (3),
moving the stand handle to bring the lamp to the desired angle, then tightening the angle fixing knob.
INSERTING OR REPLACING HALOGEN LAMP
Important: Ensure unit is disconnected from power point. Allow time for unit to cool before handling.
1. Unscrew retaining screw on top of lamp. This will release the protective grid, front
surround and glass faceplate.
2. Lower front surround down. It will be retained by the hinges.
3. To insert halogen globe, unwrap globe, taking care your fingers do not touch the
globe. Use wrapping to handle the globe. Push one end of globe into either of the
spring-loaded sockets. Locate other end on other socket, & release.
4. Carefully replace front surround, making sure that it is correctly positioned.
Screw up tightly.
Recommended replacement tube is Intex #SHT50, 500 Watt Tungsten Halogen
Lamp or similar 118mm long halogen lamps.
1
500 Watt Portable
Halogen
Work Light
SHL10
