background image

195

GS

(195GS)  SAND FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  09/18/2017

English

Model SF80220RC-1
220-240 V~, 50 H

Z

, 250 W, Hmax 5 m Hmin 0.19 m IPX4

Model SF70220RC-1
220-240 V~, 50 H

Z

, 450 W, Hmax 7.5 m Hmin 0.19 m IPX4

Model SF60220RC-1
220-240 V~, 50 H

Z

, 550 W, Hmax 7.5 m Hmin 0.19 m IPX4

MAX. WATER TEMPERATURE 35°C

Don’t forget to try these other fine Intex products: pools, pool 
accessories, inflatable pools and in-home toys, airbeds and boats 
available at fine retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves 
the right to change specifications and appearance, which may 
result in updates to the instruction manual without notice.

©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle 

Rechte vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous 
licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen 
Ländern der Welt in Lizenz von/

Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O 

Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801

 • Distributed in the European 

Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union 
durch/

Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands 

www.intexcorp.com

For illustrative purposes only. 

OWNER’S MANUAL

195-*GS-R0-1809

IMPORTANT 

SAFETY RULES

Please read, understand, and follow all 

instructions carefully before installing 

and using this product. Keep for future 

reference.

Summary of Contents for SF60220RC-1
























Reviews: