(179FR) MODEL SF10220 SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/24/2012
179
FR
SAVE THESE INSTRUCTIONS
Page 16
English
SAND FILTER PUMP HOSE CONNECTION SETUP (continued)
SETUP
INSTRUCTIONS
For INTEX pool size 16' and below:
1. In a counter-clockwise motion unscrew plunger valve union from the threaded
strainer connector
(26)
. Be careful not to lose the step rubber washer
(23)
.
2. Grasp the plunger valve assembly. Make sure the step washer
(23)
is in place.
Connect adaptor B
(28)
to plunger valve union.
3. Remove wall plug and then insert the strainer
(29 & 31)
into the lower position
of protruding hose connection, and the nozzle
(29 & 30)
into the upper position
of protruding hose connection. Adaptor B
(28)
fits over the strainer
connection
(29)
inserted into the connection. Tighten securely.
4. Remove the drain cap
(3)
before attaching the drain/waste hose or pipe.
For NON-INTEX pool:
Connect the hoses to the prefilter inlet and 6-way valve outlet with an adaptor A
(36)
.
Tighten securely. Remove the drain cap
(3)
before attaching the drain/waste hose
or pipe.
POOL
29 & 30
29 & 31
3
3
36
Hose ID 1-1/4" (32mm)
/ 1-1/2" (38mm) with
clamp
36
Hose ID 1-1/4" (32mm)
/ 1-1/2" (38mm) with
clamp
POOL
