(106) MODEL 638R FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 05/13/2014
106A
SAVE THESE INSTRUCTIONS
English
POOL CARE AND CHEMICALS
•
All pools require care to keep the water clear and hygienically clean. With proper chemical
control, your filter will help attain this objective. Consult your pool supply dealer for instructions
regarding the proper use of chlorine, algaecide and other chemical agents required for sparkling
clear
water.
•
Keep pool chemicals away from children.
•
Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could occur.
•
Daily pH checking and chemical treatment of the water is very important and can not be
overemphasized. Chlorine, algaecide and maintenance of proper pH levels are required when
filling the pool as well as during the season. Consult your local swimming pool supply store for
instructions.
•
The season's first filling of the pool may have brackish water requiring extra water additives and
extra filter changes. Do not allow swimming in pool until the pH level is balanced. Consult your
local swimming pool supply store for instructions.
•
Keep spare filter cartridges on hand. Replace cartridges every two weeks.
•
Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool and
splash water outside the pool. Lawn areas underneath the pool liner will be destroyed. Note that
some types of grass may grow through the liner.
•
Filter run time depends on pool size, weather and usage level. Experiment with various run
times so as to produce clean clear water.
CAUTION
Concentrated chlorine solutions may damage the pool liner. Always follow
the chemical manufacturer’s directions, and the health and hazard warnings.
Page 8
1.
Before emptying your pool for long term storage, or relocation, be sure the water is
directed towards an acceptable drain water receptacle away from the house. Check local
regulations for specific directions regarding disposal of swimming pool water.
2
. Now, drain the pool.
3.
When the pool is empty, disconnect all pool hoses
(8)
from the pool and filter pump,
simply reverse the set up instructions.
4.
Remove the filter cartridge as shown in the Filter Cartridge Cleaning section, steps 2 thru 4.
5.
Remove the nozzle and strainer unions from the pool wall. Place the wall plugs into the
hose connections. Loosen clamps
(7)
securing the strainer connectors
(9)
before removal.
6.
Drain water from the filter pump housing.
7.
Leave filter pump pieces and hoses outside to thoroughly air dry.
8.
Depending on the cartridge
(5)
usage, a new cartridge may be needed for next season,
keep a spare available.
9.
Cover the seal
(4)
, air release valve O-ring
(2)
and hose seals
(6)
with petroleum jelly to
preserve its resilience during storage.
10.
Store the unit and accessories in a dry place. The storage's temperature should be
controlled, between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees
Fahrenheit (40 degrees Celsius) storage location.
11.
The original packing can be used for storage.
LONG TERM STORAGE
