background image

106

GS

SAVE THESE INSTRUCTIONS

(106GS)  MODEL 638G FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  06/28/2014

English

Page 3

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

These product warnings, instructions and safety rules provided with the product 

represent some common risks of water recreation devices and do not cover all 

instances of risk and danger. Please use common sense and good judgement 

when enjoying any water activity.

•  

To reduce the risk of injury, do not permit children to use this product. Always 

   supervise children and those with disabilities.

•  

Children must stay away from this product and electrical cord(s).

•  Children shall not play with the appliance. Cleaning and user maintenance shall not   

   be made by children without supervision.

•  This appliance can be used by children aged from 8 years and above and persons    

   with reduced physical, sensory or mental capabilities or lack of experience and 

   knowledge if they have been given supervision or instruction concerning use of the    

   appliance in a safe way and understand the hazards involved.

•  

Assembly and disassembly by adults only.

•  

Risk of electric shock. Connect transformer only to a grounding type receptacle 

   protected by a ground-fault circuit interrupter (GFCI) or residual current device     

 

   (RCD). Contact a qualified electrician if you cannot verify that the receptacle is 

   protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which    

   has a maximum rate of 30mA. Do not use a portable residual current device (PRCD).

•  

Always unplug the transformer from the electrical outlet before removing, cleaning,     

   servicing or making any adjustment to the product.

•  The plug must be accessible after produc   t is installed.

•  Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn   

   mowers, hedge trimmers and other equipment.

•  The supply cord cannot be replaced. If the cord is damaged the appliance or 

   transformer should be scrapped.

•  

To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors   

   or converter plugs to connect unit to electric supply; provide a properly located outlet.

•  

Do not attempt to plug in or unplug this product while standing in water or when your    

   hands are wet.

•  

Keep the transformer more than 3.5m away from the product.

•  Keep the plug of the transformer more than 4.0m away from the product.

•  Position this product away from the pool, so as to prevent children from climbing on it  

   and accessing the pool.

•  

Do not operate this product when the pool is occupied.

•  

This product is for use with storable pools only. Do not use with permanently

   installed pools. A storable pool is constructed so that it may be readily disassembled  

   for storage and reassembled to its original configuration.

•  This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, 

ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

Summary of Contents for Krystal Clear 638G













Reviews: