background image

(105)  MODEL 637R FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  06/21/2013

105

    

SAVE THESE INSTRUCTIONS

English

Page 7

POOL CARE AND CHEMICALS 

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always follow the 
chemical manufacturer’s directions, and the health and hazard warnings.

LONG TERM STORAGE

1. 

Before emptying your pool for long term storage, or relocation, be sure the water is directed 

 

towards an acceptable drain water receptacle away from the house. Check local 

 

regulations for specific directions regarding disposal of swimming pool water.

2

.  Now, drain the pool.

3.

   When the pool is empty, disconnect all pool hoses 

(8)

 from the pool and filter pump, simply  

 

reverse the set up instructions.

4.

   Remove the filter cartridge as shown in the Filter Cartridge Cleaning section,steps 2 thru 4.

5.

  Remove the nozzle and strainer unions from the pool wall. Place the wall plugs into the  

 

hose connections. Loosen clamps 

(7) 

securing the strainer connectors 

(9)

 before removal.

6.

  Drain water from the filter pump housing.

7.

  Leave filter pump pieces and hoses outside to thoroughly air dry.

8.

  Depending on the cartridge 

(5)

 usage, a new cartridge may be needed for next season,  

 

keep a spare available.

9.

  Cover the seal 

(4)

, air release valve O-ring 

(2)

 and hose seals 

(6)

 with petroleum jelly to  

 

preserve its resilience during storage.

10.

  Store the unit and accessories in a dry place. The storage's temperature should be 

 

controlled, between 32 degrees Fahrenheit (0 degrees Celsius) and 104 degrees  

 

 

Fahrenheit (40 degrees Celsius) storage location.

11.

  The original packing can be used for storage.

• 

All pools require care to keep the water clear and hygienically clean. With proper chemical 

 

control, your filter will help attain this objective. Consult your pool supply dealer for 

 

instructions regarding the proper use of chlorine, algaecide and other chemical agents 

 

required for sparkling clear water.

• 

Keep pool chemicals away from children.

• 

Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could occur.

• 

Daily pH checking and chemical treatment of the water is very important and can not be 

 

overemphasized. Chlorine, algaecide and maintenance of proper pH levels are required 

 

when filling the pool as well as during the season. Consult your local swimming pool supply 

 

store for instructions.

• 

The season's first filling of the pool may have brackish water requiring extra water additives 

 

and extra filter changes. Do not allow swimming in pool until the pH level is balanced.  

 

Consult your local swimming pool supply store for instructions.

• 

Keep spare filter cartridges on hand. Replace cartridges every two weeks.

• 

Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool and 

 

splash water outside the pool. Lawn areas underneath the pool liner will be destroyed. Note 

 

that some types of grass may grow through  the liner.

• 

Filter run time depends on pool size, weather and usage level. Experiment with various run 

 

times so as to produce clean clear water.

Summary of Contents for Krystal Clear 637R












Reviews: