(108GS) MODEL 636G FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/22/2014
108
GS
SAVE THESE INSTRUCTIONS
English
Page 8
SETTING UP FILTER PUMP
Some countries, especially in the European community, require the filter-pump to be secured to
the ground or to a base in a permanent upright position. Check your local authorities to determine
if there is a regulation in your area regarding above-the-ground swimming pool filter-pumps. If yes,
then the filter-pump can be mounted to a platform using the two holes located in the base. See
drawing below.
The filter-pump can be mounted on a cement base or onto a wooden platform to prevent
accidental falling over. Total assembly must exceed 18kg.
1
. The mounting holes are 6.4mm in diameter and spaced 130mm apart.
2
. Use two bolts and lock nuts with a maximum of 6.4mm in diameter.
For your own personal safety, it is very important that you place your transformer more than 3.5m
away from your pump.
FILTER PUMP STATIONARY MOUNTING OPTION
130 mm
3.5 m
