112
SAVE THESE INSTRUCTIONS
Page 25
(112) MODEL 6220 KRYSTAL CLEAN POOLWATER SYSTEM ENGLISH 7.5” X 10.5” PANTONE 295U 12/25/2006
TROUBLESHOOTING GUIDE
IMPORTANT
If you continue to experience difficulty, please contact our Consumer Service
Department for assistance. See back cover for contact information.
INSUFFICIENT
SANITIZER
WHITE
FLAKES
IN THE WATER
SALT WATER
LEVEL INSIDE
THE SALTWATER
TANK DROP
TOO SLOW.
SALT WATER
LEVEL INSIDE
THE SALTWATER
TANK DROP
TOO FAST.
• Insufficient operating hours of
the saltwater system.
• Insufficient salt concentration
in the saltwater tank.
• Sanitizer loss due to intense
sunlight exposure.
• The bather load has
increased.
• Excessive calcium hardness is
present in pool water.
• Forgot to install baffle adaptor.
• Filter cartridge dirty.
• Heater or the other
accessories are in use
simultaneously.
• Pool water level is too low.
• Increase the saltwater system operating
time per day. See “Operating
Instructions”.
• Drain out all the water in the saltwater
tank. Refill water and add salt in the
saltwater tank. See "How to Add or
Remove Salt".
• Use Pool Cover when the pool is not
use and/or when the unit is operating.
• Increase the saltwater system operating
time per day. See “Operating
Instructions”.
• Drain about 20 to 25% of the pool water
and add fresh water to decrease the
calcium hardness.
• If the pool height is 42" and above,
read manual instruction and install the
suitable size of baffle adaptor.
• Clean or replace the cartridge.
• Disassemble the heater and accessories
within the circulation line.
• Fill the pool with more water.
• Remove the baffle adapter B from the
saltwater system outlet (if any).
REMEDY
CAUSE
PROBLEM
