243
PO
(243PO) MULTIFUNCTION FLOATING POOL LIGHT ENGLISH 7.25” X 4.875” 05/21/2013
SAVE THESE INSTRUCTIONS
Operation Instructions:
1. ON/OFF push button: turns the light ON and OFF, and for lighting mode selection (see Fig 5).
2. Turn on the light and place the light on the pool water surface with the ON/OFF push button facing up.
Do not immerse
the product in water.
Fig 5
Page 3
Troubleshooting guide:
Q. What should I do if the product does not light up?
A. 1. Check the battery housing to ensure 4 AAA batteries are installed correctly with regard to polarity (+ and -).
2. Check that the battery housing is snug (hand tightened).
3. Replace the batteries.
Q. What should I do if the light emitted by this product is too weak?
A. 1. Clean outside surface of the light housing using a soft damp cloth. Note: the light housing is an optical component, to
avoid any scratches do not use any hard or abrasive rag to clean it.
2. Replace all batteries with 4 new AAA batteries.
3. Pool size exceeds 18’ (549cm) diameter. Use two or more lights for larger pools.
P
ress Button
once
twice
three times
four times
Mode
(Brightness)
OFF
*Battery life
4 hours
40 hours
3 hours
*Approximate and based on 4 AAA fresh alkaline batteries.
