Intex ECO15220-1 Owner'S Manual Download

Page: 27 / 34

261A

SAVE THESE INSTRUCTIONS

(261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14” & 16”) ENGLISH 7.5” X 10.3” PANTONE 295U 06/20/2016

English

Page 27

MAINTENANCE (continued)

POOL CARE & CHEMICALS

•

All pools require care to keep the water clear and hygienically clean. With proper chemical

control, your filter will help attain this objective. Consult your pool supply dealer for

instructions regarding the proper use of chlorine, algaecide and other chemical agents

required for sparkling clear water.

•

Keep pool chemicals away from children.

•

Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could

occur.
•

Daily pH checking and chemical treatment of the water is very important and cannot be

overemphasized. Maintenance of proper pH levels are required when filling the pool as well

as during the season. Consult your local swimming pool supply store for instructions.

•

The season's first filling of the pool may have brackish water requiring extra water additives

and extra filtering time. Do not allow swimming in pool until the pH level is balanced. Consult

your local swimming pool supply store for instructions.

•

Chlorinated water may damage lawns, gardens or shrubbery as children play in the pool

and splash water outside the pool. Lawn areas underneath the pool liner will be destroyed.

Note that some types of grass may grow through the liner.

•

Filter run time depends on pool size, weather and usage level. Experiment with various run

times so as to produce clean clear water.

•

European standard EN16713-3 lists some additional pool water quality and water treatment

information that can be found at www.intexcorp.com/support.

The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity”

levels at the same time. We recommend that you test the water chemistry weekly, and maintain

the chlorine concentration at 0.5-3 ppm.

Directions and Use
1

. Dip the entire strip into the water and remove immediately.

. Hold the strip level for 15 seconds. Do not shake excess water from the strip.

. Now compare the strip pad to the color chart on the packaging label. If necessary, adjust the

chemical level in the pool water. It is very important, to use the proper technique when

testing the water's chemical level. Read and follow the written strip instructions carefully.

INTEX

TEST STRIPS (PACKED WITH THE PRODUCT)

Summary of Contents for ECO15220-1



































Search results

Summary of Contents for ECO15220-1

Reviews:

Related manuals for ECO15220-1

Brands by name

Popular brands

Intex ECO15220-1, Owner'S Manual

Search results

Summary of Contents for ECO15220-1

Reviews:

Related manuals for ECO15220-1

Brands by name

Popular brands