8
Intex Giraffe
®
intexinternational.com
ON & OFF Switch
FUNCTIONAL DESCRIPTION
2.
Then, press the cover down against the spring and, using snap-ring pliers, remove
the circlip which holds the sanding plate cover to the bracket.
3.
Finally, carefully work the vacuum hose free then lift sanding plate cover away.
Replacement is the opposite of removal. Don’t forget the spring. Entrust all
repairs to an Authorised Service Center.
TO INSTALL THE VACUUM CLEANER HOSE
1.
Unplug the machine.
2.
Plug the vacuum cleaner hose bayonet mount into the swivel mount in the back
of the machine. Once the tangs of the bayonet mount are fully inserted in the
slots, hold the swivel mount from turning and turn the hose bayonet mount
clockwise to lock.
3.
Removal is the opposite of assembly.
THE VACUUM CLEANER
Ensure that you have a bag installed in your vacuum cleaner which is approved and rated
for drywall dust.
WARNING: Failure to use an approved dust bag in your vacuum will increase the level of airborne
dust in the work area. Prolonged exposure to such dust may cause respiratory harm.
For superior dust extraction, we recommend the german made range of Intex starmix
®
dust extractors/vacuums.
STARTING AND STOPPING TOOL
Make sure that the power circuit voltage is the same as that shown on the specification plate of the
machine and that switch is “OFF” before connecting the tool to the power circuit.
To switch on:
While holding with the left hand on the column and the right hand on the main handle,
Press the rocker switch to the “on” position. Anticipate and be ready for the start up
torque when the machine first starts.
To switch off:
Press the rocker switch to the”off” position. After the machine has been switched
off, the sanding disc will still rotate for a time. Take care that parts of your body do
not come into contact with the disc and do not set the machine down while it is still
rotating!
Super Pads
Jost
®
®
Dustless Sander
®
Dust Extractors
