background image

(92IO)  52"  2-SECTIONS POOL LADDER  ENGLISH  7.5” X 10.3”  PANTONE 295U  05/28/2012

92A

    SAVE THESE INSTRUCTIONS

Page 6

English

SETUP 

INSTRUCTIONS

LADDER SETUP

TOOLS REQUIRED:  One (1) Phillips screwdriver

 

One (1) pair of pliers or a small adjustable wrench

IMPORTANT: Do not fully tighten fasterners until last assembly operation.

A

B

1.1

9

10

WARNING

  ASSEMBLE THE LEGS BEFORE INSTALLING THE LADDER STEPS.    

  FAILURE TO ASSEMBLE THE LEGS BEFORE INSTALLING THE STEPS  

  MAY ALLOW THE LEGS TO SEPARATE FROM THE LADDER DURING   

  USE, POSSIBLY RESULTING IN SERIOUS INJURY OR DEATH.

WARNING

  INCORRECTLY CONNECTED PARTS MAY RESULT IN AN UNSTABLE  

  LADDER OR LADDER FAILURE WHICH CAN CAUSE FALLING AND  

  PERSONAL INJURY OR DEATH.

1. IDENTIFY  PARTS: 

It is very important to lay out the parts correctly and  

  identify which parts connect together before starting the assembly.  

 

  Although some parts look alike, they are not always interchangeable.    

  Refer to the parts list.  

 

2. LEG  ASSEMBLY 

(

refer to figures 1.1 through 1.2

): 

1.2

A

B

Spring pin

6

IMPORTANT: 

Make sure the legs are securely connected and locked. Check 

the spring pins have snapped out before proceeding to the next step. Ensure 

the J-shaped legs are pointing outwards before installing the steps.

8

7

Press,

hold and 

insert

Summary of Contents for 52"










Reviews: