background image

(174IO)  DELUXE POOL MAINTENANCE KIT  ENGLISH  SIZE: 4.875” X 7.25”  PANTONE 295U  07/30/2013

174A

S  AVE  THESE  INSTRUCTIONS

English

Page 10

HAND-HELD SKIMMER NET ASSEMBLY & OPERATING INSTRUCTIONS

12

10

1.

  The hand-held skimmer net uses the same handle as the pool vacuum.

2.

  The skimmer net 

(12)

 has a plastic spring

 

that connects to the end of handle. Align the plastic 

 

spring located inside the net with the holes drilled in the handle. Gently squeeze together the 

 

plastic spring tips so that the handle slips onto the net and the spring "POPS" into the 

 

pre-drilled holes.

3.

  Gently sweep the surface of the pool with the skimmer net removing floating leaves, etc.

HAND-HELD BRUSH ASSEMBLY & OPERATING INSTRUCTIONS

1

.  The hand-held brush uses the same handle as the pool vacuum.

2

.  The brush head 

(11) 

has a plastic spring that connects to the end of handle. Align the plastic 

 

spring located inside the brush head with the holes drilled in the handle. Gently squeeze 

 

together the plastic spring tips so that the handle slips onto the brush head and the spring 

 

"POPS" into the pre-drilled holes.

3

.  Gently sweep the entire side and bottom surfaces of the pool liner until it’s clear of debris.

11

10

LONG TERM STORAGE

1.

  Make sure the filter pump is turned off and disconnect the power cord from the 

  electrical outlet.   

2.

  Using the Set-Up instructions in reverse, disassemble pool vacuum, hand-held 

  skimmer or hand-held brush.

3.

  Clean and air dry all the accessories and parts thoroughly.

4.

  The original packaging can be used for storage. Store in a dry, cool storage 

 location.

Summary of Contents for 28003











Reviews: