(100IO) AUTO CLEANER ENGLISH SIZE: 4.875” X 7.25” PANTONE 295U
09/03/2011
100A
S AVE THESE INSTRUCTIONS
Page 7
SETUP INSTRUCTIONS (continued)
OPERATING INSTRUCTIONS
English
SSEE
TTUU
PP
II
NN
SSTT
RR
UU
CC
TTII
OO
NN
SS
&&
OO
PP
EERR
AA
TTII
NN
GG
II
NN
SSTT
RR
UU
CC
TTII
OO
NN
SS
10.
Connect hose B
(9)
from the hose assembly to the hose A
(8)
which
was already installed in step 4. See Fig. 8.
IMPORTANT:
Run the filter pump for 10-15 minutes before connecting
the auto cleaner to the water return connector.
11.
Set up the Filter Pump following the Filter Pump owner's manual. The
auto cleaner is now ready to use.
9
8
8
1.
The filter pump is an airtight system. In a counter-clockwise motion turn
the top air release valve 1 – 2 turns to open it.
2.
When water starts flowing out of the air release valve hole, screw in the
air release valve back into the filter housing cover. Do not over tighten
the valve.
3.
Connect the filter pump to the power outlet and turn ON the pump.
4.
Hold the auto cleaner upside down below the water surface to jet out
the water. See Fig. 9. This will evacuate all the air in the hose and
auto cleaner, so the cleaner will sink to the bottom and keep the pool
clean.
5.
The auto cleaner will change direction each time one of the bumpers
touches the pool sidewall.
9
