(98IO) “ISO” BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 4.875” X 7.25” 06/17/2020
SAVE THESE INSTRUCTIONS
Page 9
98A
Seat Installation (Certain Models):
1. Inflate each seat cushion slowly to about 75% of its capacity.
2. Attach the seat cushion hinge to the hinge on the boat. Repeat the
connection on the other side and for all seats.
See Fig A.
3. Finish inflating the seat cushions slowly until it is firm to the touch
but NOT hard. DO NOT OVER INFLATE!
4. To disassemble the seats, deflate the seats first and reverse the
installation procedures.
NOTE:
Some seat cushions after inflation are tuck in directly into
the fore, mid or aft locations of the boat cockpit. No hinges.
Mariner
series
:
1. Inflate each seat cushion slowly to about 75% of its capacity.
2. Put the seat cushions into the fore, mid or aft locations of the boat cockpit.
3. Finish inflating the seat cushions slowly until it is firm to the touch but NOT hard. DO NOT
OVER INFLATE!
4. Seat cushions after inflation are tuck in directly into the fore, mid or aft locations of the boat
cockpit.
5. To disassemble the seats, deflate the seats first and reverse the installation procedures.
Fishing Rod Holder Use (Certain Models):
1. Slide the end cap over the end of the fishing rod.
2. Insert the fishing pole into the holder.
Mariner series:
1.
Slide the fishing rod holder into the mounting base.
2. Insert the end cap into the fishing rod holder.
3.
Insert the fishing rod into the end cap.
Oar Assembly:
1. Insert “Shaft A” with the pin end first into the blade. Make sure the pin is securely fastened to
the blade.
2. Insert the assembled “Shaft A” through the oar-lock with the blade towards outboard (water).
3. Place the retainer ring onto the other end of “Shaft B”, from inside of the boat.
4. Press the pin and insert shaft B into shaft A, make sure the pin is securely snapped into the
hole.
5. When the oars are not in use secure the oars onto the oar holders located on each side of
the boat.
Fig A
Shaft A
Pin
Pin
Shaft B
Blade
Retainer Ring
Fishing
Rod Holder
End Cap
Fishing
Rod
Mounting base
Fishing
Rod Holder
End Cap
Fishing
Rod
