Step 3 Install Inside Mounting Plate
1. Fix the plate with correct direction
2. Pass the IC wire through the wire hole of the
mounting plate
3. Fix the mounting plate with screws, if
keypad assembly is lopsided, please loosen the screws of keypad
assembly to adjust its position and tighten the screws of keypad assembly
and mounting plate.
Step 4 Identify Door Handing, and adjust the toggle
switch on the inside receiver assembly
Face the door from outside, the door is
left-handling door if the the hinges are on the
left side of the door, please switch the toggle
to L
Whereas the door is right-handling door if the
hinges are on the right side of the door, please
switch the toggle to R
Summary of Contents for Smart Deadbolt Lock
Page 7: ......
