Doc. Rev. 0
Installation Manual
URL
tel
http://www.intesis.com
[email protected]
+34 938047134
4 / 4
This information is subject to change without notice.
IntesisBox
®
KNX – Mitsubishi Heavy Industries AC
Enclosure
Industrial sheet metal.
Size: 215mm x 167mm x 61mm.
Weight: 2.025 Kg
Color
Gray metalized.
Power
100 to 240VAC~
50 to 60Hz
5W max.
Power connector: C14 (male)
1
Fuse
250V
1.5A
Dimensions: 20x5mm
Terminal wiring
(for low-voltage
signals)
Per terminal: solid wires or stranded wires (twisted or with ferrule)
1 core: 0.75 … 1.25mm
2
2 cores: 0.75 … 1.25mm
2
3 cores: not permitted
Mounting
Wall
KNX port
1 x KNX TP1 (EIB) port opto-isolated. Plug-in terminal bloc (2
poles). TNV-1
A-B port
1 x Superlink
®
terminals (Plug-in screw terminal block 2 poles “A”
“B”). SELV
LED indicators
4 x MHI Interface (OP, ERR, HOST, PAC)
Push buttons
1 x Reset Device
Selectors
1 x SLK selector
Console port
EIA232. (DB9 female DCE). SELV
Configuration
Via console port.
2
Firmware
Allows upgrades via console port.
Operational
temperature range
0°C to +40°C
Operational
humidity range
5% to 95%, non condensing
Protection
IP20 (IEC60529).
RoHS conformity
Compliant with RoHS directive (2002/95/CE).
Norms and
standards
CE conformity to EMC directive (2004/108/EC) and Low-voltage
directive (2006/95/EC)
EN 61000-6-2
EN 61000-6-3
EN 60950-1
EN 50491-3
1
A power cable with connector C14 male 1.6 meters long is supplied with the device.
2
Standard cable DB9male-DB9female 1.8 meters long is supplied with the device for connection to a PC COM port for configuring
and monitoring the device. The configuration software, compatible with Windows
®
operating systems, is also supplied.
Technical characteristics
