Doc. Rev. 0
Installation Manual
URL
tel
http://www.intesis.com
[email protected]
+34 938047134
3 / 4
This information is subject to change without notice.
IntesisBox
®
KNX – Mitsubishi Heavy Industries AC
Connections and indications
________________________________________________________________________________________
Notes:
1.
Mains power conection: 230VAC (see sectionTechnical Characteristics). The device provides switch and a protection fuse. Use the supplied
cable with IntesisBox (1,6m).
2.
Console conection: Connect the supplied console cable with IntesisBox (1.8 meters long, standard DB9 male-DB9 female) between your PC
and the console port of the device. Use the software LinkBoxEIB to configure IntesisBox. See the user's manual for details.
3.
KNX connection: Connect the KNX bus to the KNX connector of IntesisBox (C1). Respect the polarity.
4.
A-B connection: Connect the SuperLink
®
bus coming from the Mitsubishi Heavy Industries AC to the conector A-B of IntesisBox. Recpect the
polarity, and consult your distributor for more details.
5.
The device provides a “RESET” button.
6.
The device provides a selector to choose the SuperLink
®
bus type. If it belong to the OLD version (SuperLink
®
1), or to the NEW version
(SuperLink
®
2).
7.
OP led: indication that the device is operative.
8.
ERROR led: the led is ON when there is a communication error.
9.
HOST led: the led is blinking when there is connectivity between the two circuits that compose IntesisBox.
10.
PAC led: the led is blinking when there is activity in the SuperLink® bus, ie when there is communication between IntesisBox and AC system.
Device front view
Device back view
1
2
4
5
6
7 8 9 10
3
