IntesisBox
®
KNX - LON
Doc. Rev. 3
Installation Manual
URL
tel
http://www.intesis.com
[email protected]
+34 938047134
4 / 5
This information is subject to change without notice.
Enclosure
Plastic, type PC (UL 94 V-0).
Dimensions: 107mm x 105mm x 58mm.
Colour
Light Grey. RAL 7035.
Power
9 to 30Vdc +/-10%, Max.: 125mA.
24Vac +/-10% 50-60Hz, Max.: 127mA
Must use a NEC Class 2 or Limited Power Source (LPS) and SELV
rated power supply.
Plug-in terminal block for power connection (2 poles).
Terminal wiring
(for power supply
and low-voltage
signals)
Per terminal: solid wires or stranded wires (twisted or with ferrule)
1 core: 0.5mm
2
… 2.5mm
2
2 cores: 0.5mm
2
… 1.5mm
2
3 cores: not permitted
Mounting
Wall.
DIN rail EN60715 TH35.
LON port
1 x LON (TP-FT/10). Plug-in terminal block (2 poles). TNV-1
KNX port
1 x KNX TP1 (EIB) port opto-isolated. Plug-in terminal block (2
poles). TNV-1
LED indicators
1 x Power.
2 x KNX port activity (Tx, Rx).
2 x LON port activity (Tx, Rx).
1 x KNX programming/bus.
1
1 x LON service led.
1
Push buttons
1 x KNX programming.
1
1 x LON service switch.
1
Console port
EIA232. DB9 female connector (DCE). SELV
Configuration
Via console port.
2
Firmware
Allows upgrades via console port.
Operational
temperature
-25°C to +70°C
Operational
humidity
25-90% at 50ºC, non condensing
Protection
IP20 (IEC60529).
RoHS conformity
Compliant with RoHS directive (2002/95/CE).
Norms and
standards
CE conformity to EMC directive (2004/108/EC) and Low-voltage
directive (2006/95/EC)
EN 61000-6-2
EN 61000-6-3
EN 60950-1
EN 50491-3
1
Not operational for the moment. Reserved for future use.
2
Standard cable DB9male-DB9female 1,8 meters long is supplied with the device for connection to a PC COM port for
configuring and monitoring the device. The configuration software, compatible with Windows
®
operating systems, is also
supplied.
Technical characteristics
