IntesisBox
®
KNX - LON
Doc. Rev. 3
Installation Manual
URL
tel
http://www.intesis.com
[email protected]
+34 938047134
3 / 5
This information is subject to change without notice.
Connections
________________________________________________________________________________________
Notes:
1.
Must use NEC Class 2 or Limited Power Source (LPS) and SELV
rated power supply.
If using DC power supply:
Respect polarity applied of terminals (+) and (-). Be sure the voltage applied is within the range admitted (9 to 30 Vdc).
The power supply can be connected to earth but only through the negative terminal, never through the positive terminal.
If using AC power supply:
Make sure the voltage applied is of the value admitted (24 Vac). Do not connect any of the terminals of the AC power
supply to earth, and make sure the same power supply is not supplying any other device.
2.
Use the software LinkBoxEIB to configure IntesisBox. Consult the user's manual for details.
LinkBoxEIB
Only for configuration
See Note 2
Console Cable 1.8 m.
Standard DB9F - DB9M.
Supplied.
Power
See Note 1
KNX TP-1
(Bus EIB)
PC Console
- +
+ -
IntesisBox
®
www.intesis.com
KNX TP-1
LON TP/FT-10
B A
LON
TP/FT-10
CMN 24Vac
9 - 30Vdc
Max.125 mA
24Vac
Max.127mA
50-60Hz