IntesisBox
®
ASCII
Server - BACnet
IP
User manual v10 r15 eng
Doc: IntesisBox ASCII Server - BACnet IP client v10 r15 eng.pdf
© Intesis Software S.L.U. - All rights reserved
IntesisBox
is a registered trademark of Intesis Software SLU
URL
tel
http://www.intesisbox.com
[email protected]
+34 938047134
Page 20 of 36
4.4 Signals configuration
Select the Signals tab to configure the signals list (the gateway's internal points).
Signals list
1.
#.
Signal’s number (edit not permitted). Every row in the grid corresponds to a signal
(point). Signals (rows in the grid) can be added or deleted selecting the desired row and
clicking
Add
or
Delete
buttons. Deletion action can be executed for a single row or even
for some consecutive rows, all the rows selected will be deleted. This column is used
only to enumerate the rows in the grid (signals).
2.
Dev
. device number to which belongs the point. Referenced to the list of devices defined
in
Connection Tab
. Note that this is not the device number configured in the BACnet
device itself.
3.
Object Type
. BACnet object type for the signal. Edit using the mouse right-button-click
pop-up menu available on the column as showed in the figure below. One of the showed
object types can be selected:
7 8
9
1 2
3
4
5
6
10
11
