AirMaid® 500 W Ozone Generator User Manual
7
4. ELECTRICAL CONNECTION
5. SYSTEMTEST
The generator is supplied with a 2.5m connection cable. Connect the plug to a 230VAC 50-60Hz grounded
wall outlet.
1. Turn on the generator by setting the generator switch to ”I”. The red lamp on the power switch is lit and
you hear that the fan and ozone cell starts (a sparking sound).
b. Inspect the fan by trying whether you can feel the air flow in the outlet
(the perforated side on the short end of the generator).
c. Inspect the ozone cell only by sensing the ozone odour in the outlet.
The odour is somewhat pungent and reminds of chlorine.
2. The adjustment screw labelled “Ozone Level %” can be adjusted from 0 to 100% (0-500 mg/h). It adjusts
the time interval at which the generator produces ozone. The fan in the generator is always on.
3. Use the adjustment screw to adjust the right ozone quantity needed in the area you want to treat.
This is done by adjusting the screw to a mode where the uncomfortable odour in the room is felt at a
comfortable level. There must also be a faint ozone odour.
4. Inform persons who normally visit the area that it is undergoing ozone treatment as well as how the
ozone adjustment of the generator works.
Troubleshooting
If the generator does not work:
1. Check whether the network cable is connected to a wall outlet and that the generator switch is in “I”
position and that the lamp is red. If the generator still does not work, check whether the glass fuse is
whole and 1AT. If it is replaced and comes off, call the dealer or the manufacturer for technical support.
2. Check whether the generator produces ozone by setting the adjustment screw to ”Ozone Level %” in
position 100 %. If no sparking sound comes from the ozone cell, contact the dealer or the manufacturer
for technical support.
3. Make sure that the filter is not clogged. If it is, order a new filter from the dealer or the manufacturer.
4. Check whether the fan is working by feeling the air flow at the outlet. If the fan is not working, contact
the dealer or the manufacturer for technical support.
