Intertek Cleanica 360 EL20003, Owner'S Manual

Page: 15 / 20

Cleanica 360 ™
15
Cleaning & Maintenance
Due to the high mineral content of water in some
areas, you may notice that less steam comes out
from the accessories. This reduced steam output can
be caused by calcium buildup inside the tip of an
accessory’s nozzle. To remove calcium build-up:
1. Spray a small burst or two of spray lubricant
(which can be found in any hardware store)
inside the tip of the nozzle. Rinse and wipe away
any spray lubricant. Attach the accessory to the
appliance. Ensure that no lubricant remains
before using the appliance.
2. Fill the Water Tank with water and run the
appliance for a few minutes (see the “Using the
Cleanica 360” section). Ensure that the steam
is aimed away from any sensitive surfaces that
could be damaged by debris coming out of the
appliance.
Cleaning Blocked Steamer Accessories
1. The Cleaning Pad is machine washable. Use a
warm setting and always use a mild detergent.
2. To dry the Cleaning Pad, lay flat and air dry.
IMPORTANT: Never use bleach or fabric softener
when washing the Cleaning Pad.
Cleaning the Microfiber Cleaning Pad
Storage
1. Turn the appliance’s power off and unplug the
power cord. Let the appliance cool fully.
2. Remove the Water Tank and empty any residual
water. Clean the external surface of the appliance
and any accessories with a dry cloth.
3. Remove and clean the Cleaning Pad (see the
“Cleaning the Microfiber Cleaning Pad” section).
4. Store product in a clean, dry area away from
children. Store the Water Funnel and Measuring
Cup with the appliance.