Intertek Cleanica 360 EL20003, Owner'S Manual

Page: 14 / 20

14
Cleanica 360 ™
Cleaning & Maintenance
1. Always unplug the appliance before cleaning.
2. Drain all the water from the Water Tank and clean
the Water Tank after each use.
3. With the Water Tank removed from the appliance,
run the appliance for a short time to remove any
residual water or steam from the appliance.
4. Use detergent to clean the accessories when they
are dirty. Then, rinse the accessories with water
and air dry.
5. NOTE: The interior of this appliance contains
no serviceable parts. If any maintenance that
requires disassembly needs to be performed on
the interior of this appliance, contact customer
service using the contact information on the back
of this manual.
To clean calcium deposits that build up inside the
Water Tank:
1. Remove the Water Tank from the Main Body (see
the “Using the Cleanica 360 Cleaner” section).
2. Add one or two tablespoons of white vinegar to
the Water Tank.
3. Fill the Water Tank with water.
4. Close the Water Tank Cap.
5. Shake the Water Tank.
6. Remove any water and vinegar from the Water
Tank before using the appliance again.
7. Rinse the Water Tank.
NOTE: Vinegar should only be used to clean the
Water Tank. Do not turn the appliance on until the
vinegar has been removed from the Water Tank.
Decalcifying the Water Tank Interior
If your appliance begins to produce steam more
slowly than usual or stops producing steam, you
might need to remove limescale from the interior of
the appliance or the Water Tank. Limescale should
be removed from the appliance every 25–50 times a
full Water Tank is used and will need to be performed
more frequently in areas with hard water. To clean
limescale from the interior of the appliance:
1. Prepare a cleaning solution of ½ cup white
vinegar and 1 cup tap water. Add the cleaning
solution to the Water Tank.
2. Secure the appliance and aim the release of
steam away from the floor and surrounding
objects and surfaces.
3. Turn the appliance on (see the “Using the
Cleanica 360 Steam Cleaner” section) and let the
appliance release steam until the Water Tank is
empty.
4. Repeat this procedure as many times as
necessary until the appliance releases steam at a
normal rate.
5. Remove the Water Tank from the Main Body. Fill
the Water Tank with fresh water and rinse out the
Water Tank.
6. Fill the Water Tank with fresh water, reattach
the Water Tank to the Main Body, and let the
appliance release steam until the Water Tank is
empty.
Descaling/Cleaning Limescale