background image

18

DISH FIREBOWL | Owner and Installation Manual

WARRANTY INFORMATION

KEEP THIS FOR WARRANTY

MODEL: (circle one) 

CIR-18

   CIR-18P

   

SERIAL NO:

DATE PURCHASED:

OUTDOOR FIRE PIT BURNER: LIMITED LIFETIME WARRANTY

The following components are warranted for life to the original owner, subject to proof of purchase: 

BURNER 18 - Outdoor Fire Pit Burner - manufactured by Hevi Manufacturing Inc.

BASIC WARRANTY

Hevi Manufacturing Inc. warrants the components and materials in your appliance to be free from manufacturing 

and material defects for a period of one year from date of installation. After installation, if any of the components 

manufactured by Hevi Manufacturing Inc. in the appliance are found to be defective in materials or workmanship, 

Hevi Manufacturing Inc. will, at its option, replace or repair the defective components at no charge to the original 

owner. Hevi Manufacturing Inc. will also pay for reasonable labor cost incurred in replacing or repairing such 

components for a period of one year from date of installation. Any products presented for warranty repair must be 

accompanied by a dated proof of purchase.

This Limited Lifetime Warranty will be void if the appliance is not installed by a qualified installer in accordance 

with installation instructions. The Limited Lifetime Warranty will also be void if the appliance is not operated and 

maintained according to the operating instructions supplied with the appliance, and does not extend to (1) fire pit 

burner assembly damaged by accident, neglect, misuse, abuse, alterations, negligence of others, including the 

installation thereof by unqualified installers, (2) the costs of removal, reinstallation or transportation of defective 

parts on the appliance, or (3) incidental or consequential damage. All service work must be performed by an 

authorized service representative.

This warranty is expressly in lieu of other warranties, express or implied, including the warranty of merchantability 

of fitness for purpose and of all other obligations or liabilities. Hevi Manufacturing Inc. does not assume for it any 

other obligations or liabilities in connection with sale or use of the appliance. In states that do not allow limitations 

on how long an implied warranty lasts, or do not allow exclusion of indirect damage, those limitations of exclusions 

may not apply to you. You may also have additional right not covered in the Limited Lifetime Warranty. Hevi 

Manufacturing Inc. reserves the right to investigate any and all the claims against this Warranty and decide upon 

method of settlement. For information about this warranty contact:

Hevi Manufacturing Inc

7650 Kimbel Street

Units 22-27

Mississauga ON L6S 1B1

Canada

Summary of Contents for CIR-18



















Reviews: