GB
Operating instructions
The wireless built-in switch (Fig. 1) is suitable for wirelessly switching
on/off all lamps and electrical devices
with up to 2000 watt switching power. The switch can also be easily
installed in the supply line.
The built-in switch is intended for surface and flush mounting.
The fastening straps can be broken off to save space when installing in a
flush-mounted box Fig. 2
Compatible with all intertechno wireless transmitters manufactu-
red in 1995 or later.
Mounting (only to be carried out by a qualified electrician):
1.) Turn off the main fuse.
2.) The connections must be the same as in Fig. 3.
Coding (Fig. 4)
Please also observe the operating instructions for your transmitter.
3.) Turn on the fuse again and have the desired transmitter ready to
hand.
The learn button (L) can now be turned on to check the connecti-
ons, with a brief press (without transmitter) using a pointy object
(e.g. paperclip, ballpoint pen).
4.) By long-pressing (approx. 2-3 seconds) the learn button (L) the LED
will flash slowly, the radio receiver is then ready to code the transmi-
tter.
5.) Press the ON button on the transmitter.
The wireless receiver will switch twice to confirm that the new code
has been accepted.
The encoding is now complete.
CMR-2000
GB
Operating instructions
If no signal is transmitted within 12 seconds, the learning process is
automatically aborted.
16 different codes or transmitters can be taught in per channel.
The encoding remains saved even after a power cut.
Erasing individual codes:
Proceed as described in points 4.) and 5.), however, press the OFF but-
ton instead of the ON button.
Erasing all codes:
Hold down the learn button (L) for approx. 6 seconds until the LED
flashes quickly.
Briefly release the button and then press the learn button (L) again.
The delete process is confirmed by switching twice.
To view the declaration of conformity, please visit
www.intertechno.at/CE
CMR-2000
›
Summary of Contents for CMR-2000
Page 2: ...1 2 ...
Page 3: ...3 3 ...