![Intertec Data Systems TC D Operating Instructions Manual Download Page 6](http://html1.mh-extra.com/html/intertec-data-systems/tc-d/tc-d_operating-instructions-manual_2080707006.webp)
www.intertec.info
Operating Instructions Temperature Controller TC D
Page 6 / 6
HOM107626379Ien-7
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany ·
+49 9445 9532-0 · [email protected]
The
manufacturer,
INTERTEC-Hess
GmbH,
Raffineriestrasse 8, 93333 Neustadt/Donau, Germany,
hereby declares in sole responsibility that the product
Product / Type designation:
TC D
complies with the provisions of the following directives
2014/34/EU (ATEX), 2014/30/EU (EMC), 2011/65/EU
(RoHS), 2012/19/EU (WEEE) complies with the following
standards, harmonized standards, where appropriate
and/or standardized documents:
EN IEC 60529:1991+A1:2000+A2:2013
EN IEC 60079-0:2014
EN IEC 60079-1:2014
EN IEC 60079-11:2012
EN IEC 60079-18:2015
EN IEC 60079-31:2014
EN IEC 60079-7:2015
EN IEC 61000-6-4:2007+A1:2011
Harmonized Standard (RoHS):
DIN EN IEC 63000:2019
Designation:
0102
II 2 G Ex e mb [ib] IIC T4
II 2 D Ex tD A21 IP66 T130°C
PTB 04 ATEX 2022 X
Neustadt, Sept. 10th, 2019
Dipl.-Ing. Martin Hess, Managing Director
14
Further information and service
If the information contained in this instruction manual
should not be sufficient in any way, then INTERTEC
would be glad to be at your disposal to provide further
information and service.
Please contact your INTERTEC contact person or
directly contact
INTERTEC-Hess GmbH
Raffineriestr. 8
93333 Neustadt/Donau
Germany
Phone: +49 9445 9532-0
e-mail: [email protected]
Website: www.intertec.info
Warranty
The legally defined warranties and warranty periods of
24 months are applicable to our scope of supply and
services.
You will find more detailed information in the
manufacturer warranty from INTERTEC for heating
systems and accessories.
These instructions do not claim to take all
designs, options or changes into
consideration, even in association with
installation, operation or maintenance.
INTERTEC does not accept responsibility
for providing information about changes
made retrospectively.